Subject: Consolidation of gouache
At one time I worked on a number of watercolor paintings on silk. The watercolor pigments were very coarsely ground and had very little apparent binder. They were to be stabilized in preparation for washing to remove accumulated grime, bird and rodent droppings, and other horrors acquired while stored for many years surface-up in an old warehouse. I used two applications of 1% polyvinyl butyral (Butvar B-98, I think) in ethyl alcohol. These were flooded on the painted areas with a disposable polyethylene pipet. This material is soluble in ethyl alcohol, but it does not readily form discrete films from ethyl alcohol solutions. The resin "agglutinates" or collects between the pigment particles, binding them together. The lack of saturation by the resin matrix avoids color saturation effects or shininess. The binding geometry can be clearly seen under a microscope. Since the resin will form bound chains of pigment-soluble dirt-pigment, when the dirt is washed out, the consolidation must be repeated or renewed. It still remains invisible, however. A caution--under certain conditions, the resin will reticulate, creating a blanched appearance. Not to worry, as rewetting with ethyl alcohol will usually remove the "blanching". Some people have indicated concerns, mostly theoretical, that this class of resins may not be stable over long periods. I have used the stuff for over 20 years, as have many textile conservator colleagues, and have yet to see or hear about any shift in appearance or resolubility. Good luck. Geoffrey I. Brown Kelsey Museum, University of Michigan *** Conservation DistList Instance 7:82 Distributed: Monday, May 16, 1994 Message Id: cdl-7-82-001 ***Received on Thursday, 12 May, 1994