Subject: Paperback binding service
Roxanna Herrick <roxanna-herrick [at] library__wustl__edu> writes: >I recently received a flyer and sample bound book from a company called >Midwest Library Service. I, too, received a sample bound book from Midwest Library Service recently. Their product is what I would call a "deluxe" version of vendor pre-binding of paperbacks, a service that is offered by most library book vendors. Most vendor pre-binds are economy-style library binding--either double-fan adhesive bound, oversewn, or side-sewn (if very thin); with Type-II non-woven covering material or a Mylar-covered case made from the paperback cover over light-weight boards. Economy binding is suitable for small light-weight volumes. Most vendor pre-binding is in the $4-6 range. Some vendors have their own binderies; others have pre-binding done by an LBI-member binder or other third-party binder. Midwest's product is a little different. The volume I received was double-fan adhesive bound, but had a buckram covered case, with front and back paperback covers mounted. According to our Midwest rep, the pricing is calculated as the paperback list price, less 5%, plus $6,75 for binding. He also says that all volumes are DFA and none are oversewn. I asked specifically about this, since I had seen oversewn samples in 1991 when Midwest first introduced this product. Technically, this product *does* meet the LBI Standard (8th ed, 1986) and its May 1993 amendments. However, the volume I received had two serious structural problems: poor joint adhesion, and vague, indistinct joints. Inside the front and back of the volume, the endpaper/spine lining combo was not adhered to the boards/joints for more than 5/8" up and down the whole length of the spine. I spoke with our Midwest rep about this, and at his request returned the volume to them on 6 Sept with a letter explaining the problem. Although vendor pre-binding has workflow & budget benefits for some libraries, I am wary of it from a preservation perspective. It treats all paperbacks the same, regardless of their original book structure, size, weight, expected use. At Mercer, we have discontinued all vendor pre-binding, preferring instead to bind only when use warrants it, and to select a binding style appropriate for the physical and usage needs of each volume. The quality of the vendor pre-binding that I have seen varies widely. Some is excellent, and some is not-so-hot. I feel strongly that libraries that use vendor pre-binding services should subject the bound volumes to the same kind of scrutiny and quality inspection that they use for volumes from their regular library binder, and give the vendor prompt feedback if problems are found. Carol Eyler Mercer University Main Library Macon, GA 912-752-2193 Fax: 912-752-2111 *** Conservation DistList Instance 8:21 Distributed: Thursday, September 22, 1994 Message Id: cdl-8-21-003 ***Received on Wednesday, 21 September, 1994