Subject: Pest control
In reply to Dean DeBolt at the University of West Florida, I suspect we operate under similar climatic conditions, we certainly often face similar problems. Without reference to the area floorspace, it is difficult to make a relevant proposal, but some anecdotal exchange may be helpful. We clean mould from books with a solution of 95% ethyl alcohol, diluted 1:1 with distilled water. The exact solution is not important, but it must be above 35% to be effective and below 75%. Above that the outer wall of the organism is precipitated to a protective gel layer. Using adequate protective clothing, including masks to hinder the allergic reactions recently discussed, the solution is applied as sparingly as possible on a clean cotton cloth, and disposed of forthwith. Affected furniture is sterilised similarly. The insect problem may be Psocoptera (booklice), though they usually tend to be translucent and difficult to spot immediately. The clustering indicates a recent hatching, so the faster you react the better. Some old-fashioned chemical bludgeoning of the structure may be acceptable under the temporary conditions. As Psocoptera tend to thrive in a damp and mouldy environment, I would recommend forced ventilation as the most effective management tool, borrow a few electric fans/ventilators and keep the air moving in the interim. I would be interested to hear how others handle similar problems. Dale Peters Paper Conservator Campbell Collections of the University of Natal *** Conservation DistList Instance 8:34 Distributed: Monday, November 7, 1994 Message Id: cdl-8-34-002 ***Received on Friday, 4 November, 1994