Subject: Architectural drawings
Cecilia Vietto <cvietto [at] agatha__unr__edu__ar> writes >... The biggest >problem that we have is to relax the drawings and flattening them. them." The Micro Climate Generator has been used to successfully relax and flatten very delicate rolled paper documents in a special chamber at the Ontario Archives in Toronto for some years now. As I understand it, the procedure generally used is as follows: The chamber is initially set for a humidity of about 50%, regardless of the initial moisture level of the rolled document. The document is left in the chamber at least overnight. The humidity level is then ramped up by 10%, and the chamber is maintained at the new level of humidity to allow the document to stabilize. After a few hours, the chamber is ramped up by another 10%. This is repeated until the chamber is at 80% humidity. After the document has stabilized at the final humidity, it is placed between felts and under weights. This chamber was custom-built specifically for this purpose some years ago. The original humidity control mechanism had a tendency to "spike" (as do most humidity control systems). A Micro Climate Generator (MCG) was used to replace the built-in system in 1992, and has been used extensively since then. The MCG uses a patented system to provide extremely even supply of temperature-sensitive humidity controlled air for display and research. Caution: It has been noted that transparent paper may be prone to dimensional changes when humidified, so this flattening method may not be indicated for this project. More information on the Micro Climate Generators may be found on our web site: <URL:http://www.keepsafe.ca> or by calling me on our toll free line. Jerry Shiner Keepsafe Systems Supplies and Solutions for Microclimate and Oxygen-free storage toll-free phone: 800-683-4696 Object and Textile Conservation Services Ltd. *** Conservation DistList Instance 15:57 Distributed: Friday, February 15, 2002 Message Id: cdl-15-57-006 ***Received on Friday, 15 February, 2002