Subject: Binder for cellulose powder
Lori Arnold <woodbldg [at] aol__com> writest >I am working on a large architectural wood conservation project that >requires aesthetic repair on termite-damaged polychromed ceiling >beams in an 18th century chapel. The termite activity is not active >in these locations, but there is always the possibility of it >returning. I do not want to use a non-reversible repair, such as >epoxy. ... I have had some good success using cellulose pulp/powder in 1% CMC as a paste filler for worm eaten wood. The wood has to be consolidated first (I first saturate it with 5% Butvar in ethanol, so this may not be compatible with your painted surfaces) to prevent the damaged wood from being affected by the water, and to strengthen the wood a little. Then the cellulose paste can be injected into holes, and when dry, is very strong, light and reversible to a point (theoretically it reverses in water but getting into crevices to reverse it would be difficult). It shrinks down while drying, requiring an additional layer or two. The resulting fill is not super smooth, but can be sanded, smoothed with water and painted. Or a water-based spackle can be used on top for a smoother surface. If the gaps are very large and deep, you would have to build it up in layers, as it would slump, and the water takes a while to evaporate. Ethanol-soluble cellulose ethers can be used to make a paste too, but it does not create a strong result (stays soft and spongy when dry). You could add borates and I don't think it would adversely affect it, but I have not tried it. Pigments can be added, but there is a marked color change in drying (it gets lighter) and getting an intense color is tricky. My attempts to used water-dispersed synthetic resins instead of CMC did not have such satisfying results. Hope all this might be of some use to you, Linda S. Roundhill Art and Antiquities Conservation 18121 157th Ave NE Woodinville, WA 98072 425-481-0720 *** Conservation DistList Instance 19:1 Distributed: Wednesday, June 15, 2005 Message Id: cdl-19-1-004 ***Received on Tuesday, 7 June, 2005