Subject: Consolidant
Claire Daly <claire_daly [at] birmingham__gov__uk> writes >I am to conserve a large panel with applied "Grinling Gibbons" >carvings, which has suffered from severe Furniture Beetle >infestation. After Thermo Lignum treatment, I need to consolidate >the flight holes. Does anybody have experience of consolidating >Gibbons carvings, or can anybody recommend a suitable consolidant, >which will give sufficient depth of penetration and also avoid >swelling the wood fibres? Paraloid B72 in acetone has been >suggested, but I am interested in alternatives. I have no experience with Gibbons carvings, but you might find that using B-72 in toluene or xylene will give better penetration and cause less darkening and skin formation. Of course these can't be used without proper precautions, and will require a higher concentration of resin to be effective. If acetone is used, make sure it has a very low water content. Many commercial acetones are loaded with water and this will impede penetration and soften the fibers. I like using Butvar (polyvinyl butyral) in anhydrous ethanol, as it darkens less, is an excellent water repellant and the fumes are less dangerous. I have not scientifically compared penetration aspects, but I am guessing that Butvar in ethanol would not penetrate as well as B-72, as it is more viscous in solution. Many folks insist on using low viscosity epoxies, but I don't think that is a good option except in certain circumstances where load-bearing or weather protection is crucial. Keep in mind any surface treatments that may be adversely affected by the different solvents, as well as reversibility factors and any gap-fills that might be used later. I am sure you know most of this but I mention it all for the sake of completeness! Hope that is somewhat helpful, though I am sure there are other options I have no experience with. Linda S. Roundhill Art and Antiquities Conservation, L.L.C. 18121 157th Ave NE Woodinville, WA 98072 USA *** Conservation DistList Instance 20:1 Distributed: Saturday, June 24, 2006 Message Id: cdl-20-1-010 ***Received on Wednesday, 21 June, 2006