Subject: Iron cannons
Noora Hirvonen <noora.hirvonen [at] kolumbus__fi> writes >I am seeking information to help me to determine the right >conservation treatments for over hundred iron cannons that are >located outdoors around Suomenlinna fortress Prince of Wales' Fort near Churchill, Canada has a very similar arctic, marine climate to Suomenlinna. We are on the coast of Hudson Bay and our latitude is just south of 60 degrees. The fort has 42 British cannon from the 18th century still standing on the ramparts. Robert Smith and Howard Wellman both make very good recommendations for cast iron cannon, however, I want to add a word of caution. We have found through experience that coatings which work well in southern climates do not always cure properly in the arctic and sub-arctic. Epoxy coatings in particular do not cure properly if the ambient temperature drops below about 20 deg. C within 24 hours after application. There are "polar" formulations, but they do not work very well either. If possible, moving the cannon to an inside workshop is the best environment to apply the coatings. It also is the easiest for containing the blast media, if you are using air abrasion for cleaning. A temporary enclosure with heating may be an option, if the cannon cannot be moved. For further information on our cannon project (what worked, what did not work, and why), please refer to: Busse, E., "The Manitoba North Cannon Stabilization Project", Metal 95 Proceedings of the International Conference of Metals Conservation, Semur en Auxois, Sept. 1995, James and James Ltd., London, 1997, pp 263-268. Croome, H.L,, "Corrosion rate study of cannon at the Prince of Wales' Fort", Metal 04 Proceedings of the International Conference of Metals Conservation, Canberra, Oct. 2004, National Museum of Australia, 2004, pp 195-206. Liz Croome Conservator Supervisor Parks Canada *** Conservation DistList Instance 21:9 Distributed: Friday, June 8, 2007 Message Id: cdl-21-9-004 ***Received on Tuesday, 29 May, 2007