Subject: Waterlogged leather
Maria Grammatou <mgrammat403 [at] yahoo__com> writes >We have found a piece of waterlogged leather together with copper >coins, obviously it must have been a small leather bag. The biggest >fragment is of the size of a thump and it carries some small coins. >There is not enough leather to experiment various treatments. Which >would be the safest procedure somoone could follow so as to preserve >it? Maybe a PEG would be suitable, but which one would be best? The >literature is a bit scary always mentioning procedures that fail and >succeed even for different pieces of the same object. Any help will >be appreciated. Instead of PEG I would use Glycerol, since the latter leaves the leather more flexible than the former. A solution of 20-30% v/v, depending on the condition of your pieces, should be sufficient. There are also other things, in such a treatment, to consider apart from the lubricant. Since the leather pieces were found together with copper coins it is most possible that they would be "contaminated" with copper salts/corrosion products. In order for any lubricant to work you would need to remove these first. That can be achieved by using a sequestering agent, such as EDTA. Also you would need to consider the drying method after lubrication. The safest would be freeze-drying, but I am assuming that you wouldn't probably have a freeze-dryer in your lab. Other alternatives would be solvent drying (either ethanol or acetone) or controlled environment drying with silica gel, where you gradually lower the RH level. A good, although old, article for such case is: Ganiaris, H. et al. (1982) A Comparison of some treatments for excavated leather. In: The Conservator 6. UKIC. 12-23. Konstantina Tsatsouli, MSc Conservator 13th Ephorate of Prehistoric and Classical Antiquities Archaeological Museum of Volos *** Conservation DistList Instance 22:30 Distributed: Tuesday, November 25, 2008 Message Id: cdl-22-30-001 ***Received on Monday, 10 November, 2008