[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: arsclist SoundForge 4.5--sampling rate
In my opinion, and in a single word, no.
The recordings you have are surely not of
a quality which would suffer audibly from
16 bits @ 44.1 kHz. Just be sure to record
as loud as possible in order to activate as
many of those 16 bits as possible.
Doug Pomeroy pomeroyaudio@xxxxxxx
Audio Restoration & Remastering
----------
>From: "Michael Ridderbusch" <mridder@xxxxxxx>
>To: <ARSCLIST@xxxxxxxxxxxxxxxx>
>Subject: arsclist SoundForge 4.5--sampling rate
>Date: Thu, Jan 10, 2002, 11:14 AM
>
> 1/10/2002
>
> We're looking for opinions regarding the sampling rate
> appropriate for making digital copies of folk music field
> recordings from tape to CD. We have SoundForge 4.5.
>
> Most of our Appalachian folk music collection was recorded
> in the 1930s - 70s, the earliest to aluminum disc. It's possible
> that a few of the later recordings are in stereo. Later, most
> of these recordings were professionally transferred to tape on
> 12 inch reels recorded at 15 ips.
>
> Would it make a significant difference to sample this kind of
> material at a rate higher than 16 bits?
>
>
>
> --------------------------------------------------------------------
> Michael R. Ridderbusch
> West Virginia and Regional History Collection
> West Virginia University Libraries, Colson Hall
> Morgantown, WV 26506-6464
>
> mridder@xxxxxxx
> phone 304-293-3536
> fax 304-293-3981
> http://www.libraries.wvu.edu/wvcollection/index.htm
>
>
> -
> For subscription instructions, see the ARSC home page
> http://www.arsc-audio.org/arsclist.html
> Copyright of individual posting is owned by the author of the posting and
> permission to re-transmit or publish a post must be secured
> from the author of the post.
>
-
For subscription instructions, see the ARSC home page
http://www.arsc-audio.org/arsclist.html
Copyright of individual posting is owned by the author of the posting and
permission to re-transmit or publish a post must be secured
from the author of the post.