[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ARSCLIST] Identifying Acetate Tapes
The strange part is the fact that with film - light is more translucent with a polyester base and less so thru the acetate base. Anyone have any ideas, or guesses why? No one has been able to answer this yet!! It is a very strange phenomenon. I still think that it has to do with the tapepack, but I could be wrong.
Lance Watsky
Preservation & Media Specialist
The Georgia Archives
5800 Jonesboro Road
Morrow, GA 30260
678-364-3764 (phone)
678-364-3860 (fax)
lwatsky@xxxxxxxxxxxxxxx
www.GeorgiaArchives.org
-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:ARSCLIST@xxxxxxx]On Behalf Of Edward A. Falk
Sent: Wednesday, March 02, 2005 2:05 AM
To: ARSCLIST@xxxxxxxxxxxx
Subject: Re: [ARSCLIST] Identifying Acetate Tapes
On 2005.03.01 07:25, Watsky, Lance wrote:
> I was hoping that someone can tell me if the following statement is true or incorrect:
>
> A colleague was telling me that you can tell the difference between an audiotape that was recorded on an acetate tape, versus one that was created on a polyester base, by holding the tape up to a light source. The colleague went on to say that light will pass thru the acetate tape, whereas it will not pass thru polyester tape.
They're right. You can also tell the difference by pulling on it until it
breaks; the acetate snaps off cleanly while the polyester stretches first.