[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] baking tapes



1- VERY  IMPORTANT !!- Put the tape on a metal reel.   When
transferring the tape to the metal reel, don't allow it to rub against
guides or heads in the tape machine as it will cause the sticky shead to
build up in clumps randomly on the tape, and make it all but impossible
to remove. Wind the tape loosely on the reel.   Reels should be evenly
spaced with an empty reel between each full one.

FAR more important than this is that you must use something OTHER than your gas kitchen oven. The heat needs to be dry heat and gas heat produces water vapor. NOT good. An electric oven may work, but you need to have perfect temp control. That 130 degrees F temp is borderline melting point. I've used 120-125, testing with the most accurate thermometers I could get my hands on. Check over a period of time as the oven will naturally cool and need the heating element to come on again which can sometimes cause the temp to shoot over the 130 degree point. At that point tape starts to curl and is ruined.

Not all sticky shead  responds to this - in  the many dozen which I've
successfully treated this way , there have been on or two which wouldn't
clean up. Even with several bakings and with extended times.

If the tape didn't respond to baking, then it wasn't sticky shed that was the problem.



-----------------
Diamond Productions
Specializing in analog tape & film preservation / restoration in the
digital domain.
Dave Bradley   President


[Subject index] [Index for current month] [Table of Contents]