[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] USB music card vs. onboard digitization



Alyssa,

It's always good to hear your perspective. I've been rather pleased with my middle-of-the-road (i.e. not Weiss) RME Multifaces which keep the conversion outside the computer, but you're in the just-under-a-grand range for 8-channels when you buy the Multiface and its dedicated PCI card. The link between the two is on a 1394 cable, but not 1394 protocol.

I also recently purchased a MOTU 828 MK II which is a 1394-connected device to go with my laptop. It offers eight line inputs and two mic inputs, simultaneously.

Arny Krueger has done a great job (although not always including the latest) of comparing in-PC sound cards.

http://www.pcavtech.com/soundcards/compare/index.htm

The DAL card offers good value for money for stereo interfacing. I think Tom Fine can attest to that.

If you're going to spend the time to digitze 1000 records, I think spending a little time up front selecting an outstanding card (for the budget) makes sense. Of course, one also needs to pay attention to the analog chain as well. But time ends up being the most valuable commodity and doing something that has a mediocre result is, in the end, a waste of time.

Cheers,

Richard

Cheers,

Richard

At 12:59 AM 1/27/2006, Alyssa Ryvers wrote:
Does resolving interrupts make the sound more satisfactory? Enquiring minds want to know, because last time I resolved an interrupt, it didn't. Doesn't mean it doesn't now, and I'm open to hearing about that, because I'm always interested in keeping up, and it's been years since I fuddled with interrupts on a sound card. I'm sorry for the weird mood, but I do think from the tone of Mr. Bresler's post, you might overwhelm him by suggesting he inspect waveforms visually, etc. You start talking "Spectrum Analysis", and you're making me nervous too


I think exploring sound cards is a responsible way to go before you take on a task of 1000 xfers. My 2c, but wouldn't know which is the best of the low-end stuff. ProTools ain't worth writing home about, and that's Medium end. Perhaps someone here has listened to the lower end lately; certainly used to be better to keep the conversion outside the computer. I wouldn't trust it inside. If these are copies for yourself (you're transferring your personal collection because you want to retire your turntable, etc.), not for preservation purposes (the one pressed copy of your Grandmother telling stories), then the decision isn't as critical. I still would go for outside the box (computer), and wait to see if someone else trolling on here has taken a listen to the converters under $X? Then go take a listen for yourself, if you can, at a store using headphones in a quiet(!) environment. Listen for noise, of course, but also listen for warmth, brittleness - all these things (converters) colour the sound, and in the end, you're going to have to live with the best choice given the choices you present yourself with. Take a listen to an Apogee converter, in order to compare with something that is Professional quality (a number of music stores have the Apogee MiniMe [$1000ish] kicking around). Be sure to listen to the same sample and bit rate (ex: 44.1K, 16bit) on both the Apogee and the lower end ones, otherwise you're comparing apples with...even ProTools starts sounding like it maybe - might be - reasonable - at 96K, 24bit [faster rates].


And then you can compare all that to what you've already got, and voila!

Best,

Alyssa.
:)

"If someone, holding fast to the name of Bodhisattva Perceiver of the World's Sounds should enter a great fire, the fire could not burn him...If one were washed away by a great flood and call upon his name, one would immediately find himself in a shallow place." (The Lotus Sutra)


[Subject index] [Index for current month] [Table of Contents]