[Table of Contents]


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ARSCLIST] humidification treatment for acetate tape (was Re: [ARSCLIST] old acetate tapes - curling/tape tension remedies?)



This method worked on some of my own problem tapes. It was passed on to me by Bill Storm.

Stuff a couple of socks with a water absorbing cloth. Wet. Put socks, tape in a more or less airtight container. Be sure to remove the tape from its box! A closed dresser drawer will do. Let it sit a month or so.

This seems to be a sluggish version of Richard's method.

Steve Smolian
----- Original Message ----- From: "Richard L. Hess" <arclists@xxxxxxxxxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxx>
Sent: Tuesday, June 06, 2006 11:11 AM
Subject: Re: [ARSCLIST] humidification treatment for acetate tape (was Re: [ARSCLIST] old acetate tapes - curling/tape tension remedies?)



I think this is the post you MIGHT be looking for. I have some more acetate-based Magnetophonband up for treatment - most in FAR worse condition than the one I treated.

I would be very curious to hear Steve's approach.

Date:         Thu, 6 Oct 2005 14:37:35 -0400
From: "Richard L. Hess" <ArcLists@xxxxxxxxxxxxxxx>
Subject: Re: [ARSCLIST] old acetate tapes - curling/tape tension remedies?

At 11:37 AM 10/6/2005, dave n wrote:
Hello all -

I'm looking for information about how anyone here on the arsc-list has handled and transferred old acetate tapes that have begun to curl?

Hello, Dave,


Friedrich Engel, the retired BASF historian, gave me a present in a phone conversation (yes, to Germany, his English was far better than my German). You can re-hydrate acetate tapes.

The procedure I used, based on discussions with Engel, was to place the tape in a 100% humidity atmosphere for about 24 hours.

The subject in question was a 1935 Carbonyl Iron tape from the Jack Mullin collection. Too bad, there were only a few tones on it, but it played.

When I first got it, it behaved much like a carpenter's steel tape measure and you could hold a foot or more of it extended. After the treatment, it felt like a satin ribbon.

I placed the tape in an open container inside a sealed container. The sealed container had about an inch of water in the bottom. The tape was up on spacers in the open container. This was room temperature.

I tried this again with a tape that spent several years behind a woodstove and it did soften it a bit, but the tape was too blocked (adhered layer to layer by edge melting) and too fragile to play either before or after this treatment, although the fragile pieces were much softer even after this extreme.

I would suggest trying this with one reel that is not as important to get the "feel" of the process.

If it works, thank Herr Engel, if it doesn't please let us know here and let us know your experiences.

I would think this is safer than trying to force the tape into contact by either tension or pressure pad.

I make no warranties as to the long-term effects of this treatment.

Cheers,

Richard

Richard L. Hess                   email: richard@xxxxxxxxxxxxxxx
Aurora, Ontario, Canada       (905) 713 6733     1-877-TAPE-FIX
Detailed contact information: http://www.richardhess.com/tape/contact.htm
Quality tape transfers -- even from hard-to-play tapes.

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.8.2/357 - Release Date: 6/6/2006




[Subject index] [Index for current month] [Table of Contents]