Re: [ARSCLIST] MX5050 speed change

[John Loy <jloy@xxxxxxxxxxxxx>]

We tried extensivly to do that change but were told it is time 
consumeming and counter productive  to do then have to change back and 
forth all the time. If it is something permanent or you have a whole  
lot of tapes to do I would suggest it. The manual should give you step 
by step instructions. Of course re-alignment etc will be in order. What 
we have done to keep workflow going is just to  record into our DAW at 3 
3/4 speed on 88.2 sampling rate . Then manually change the sample rate 
to 44.1 and there you have it.
John Loy



Ganesh.Irelan@xxxxxxxx wrote:

> Someone mentioned using an Otari MX5050 recently.  Has anyone done a speed conversion down to 1 7/8 ips with that machine?  Is it possible?
>
> Thanks,
> Kevin
>