Re: [ARSCLIST] Otari 5050-B III Pinch Rollers

[phillip holmes <insuranceman@xxxxxxxxxx>]

You can have them rebuilt by Terry at Terry's Rubber Rollers.  He's had lots 
of positive feedback.
http://www.terrysrubberrollers.com/

Nice guy and cheaper than new.
Phillip
----- Original Message ----- 
From: "Rod Stephens" <savecal@xxxxxxxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxxxxxx>
Sent: Friday, August 04, 2006 4:35 PM
Subject: Re: [ARSCLIST] Otari 5050-B III Pinch Rollers


> As I mentioned in an earlier email, John French carries parts for Otari.
> http://www.jrfmagnetics.com/
> From this opening page, you can go to the his "pro audio parts" section 
> which includes Otari pinch rollers.  John's company is based in New 
> Jersey.
>
> From his price list:
>
> MX5050
>   1/4"
>    Pinch Roller     KP0A007     ATH-5050-4P    $60.00
> MX5050
>    1/2"     Pinch Roller     KP0A009S     ATH-5050-2P     100.00
> MX5050
>    1/4"     Impedence Roller     KI-4J-B     ATH-12-4T     120.00
> MX5050
>    1/2"     Impedence Roller     KI0A038     ATH-12-2T     120.00
>
> Rod Stephens
>
> Bruce Maddocks wrote:
>
> > You can try Mitch over at Otari USA.
> >
> > His number is 818 734 1785  x103
> >
> > Cheers!
> >
> > Bruce Maddocks
> > Cups 'n Strings Santa Monica
> >
> > -----Original Message-----
> > From: Association for Recorded Sound Discussion List
> > [mailto:ARSCLIST@xxxxxxx] On Behalf Of Marie Azile O'Connell
> > Sent: Friday, August 04, 2006 11:09 AM
> > To: ARSCLIST@xxxxxxxxxxxxxxxx
> > Subject: Re: [ARSCLIST] Otari 5050-B III Pinch Rollers
> >
> > Hi Joe
> >
> > You could try Radio New Zealand, someone like Colin Pearce or Matt Finn 
> > may
> > be
> > able to help.  They did have an abundance of these machines. 
> > www.radionz.co.nz
> > Worth a shot, the postage may be a problem, if they indeed do still have 
> > the
> > machines.
> >
> > Cheers
> > kiwi
> >
> > Marie O'Connell
> > Sound Archivist/Sound Engineer/Sound Consultant
> > Cell: 601-329-6911
> >
> >
> > Quoting JPPiano@xxxxxxx:
> >
> >
> > > Hi, Guys
> > >
> > > Any ideas where I can get these? Thanks!
> > >
> > > Joe Patrych