Re: [ARSCLIST] Cracked Cylinder Record

["Rollin' Recording" <lou@xxxxxxxxxxxxxxxxxxx>]

YIKES...my splicing tape stock portfolio takes yet another hit!

Lou

Lou Houck
Rollin' Recording
208 River Ranch Rd.
Boerne,  TX   78006
(830) 537-5494
(830) 537-5495 [ fax ]
lou@xxxxxxxxxxxxxxxxxxx
www.rollinrecording.com



----- Original Message ----- 
From: "Tom Fine" <tflists@xxxxxxxxxxxxxxxxxxx>
To: <ARSCLIST@xxxxxxxxxxxx>
Sent: Thursday, July 26, 2007 6:35 PM
Subject: Re: [ARSCLIST] Cracked Cylinder Record


> Back in ye olde tape splicing days, it took about as much time as Terry 
> faces, but one cut and splice did the job for each click.
>
> Geeze, I hope that old timer could sing. That's a lot of work.
>
> -- Tom Fine
>
> ----- Original Message ----- 
> From: "Mike Richter" <mrichter@xxxxxxx>
> To: <ARSCLIST@xxxxxxxxxxxxxxxx>
> Sent: Thursday, July 26, 2007 5:44 PM
> Subject: Re: [ARSCLIST] Cracked Cylinder Record
>
>
> > Robert Hodge wrote:
> > > GAD !!
> > >
> > > If Cooledit hasn't some form of sensitivity control for setting a
> > > threshold, I see a weekend of agony in your future.
> >
> > I think you misunderstand the problem.
> >
> > These are not clicks overlying musical material. They neither replace 
> > recording nor coincide with it. Each represents the milliseconds of space 
> > occupied by that pass over the crack. In other words, they are brief 
> > intrusions into the flow of audio.
> >
> > ClickFix (far better than Audition's built-in tool) or any other 
> > declicker will fill in the space the click occupies with its best 
> > estimate of the missing audio. What's needed is just what is being done 
> > manually: excise the intrusion.
> >
> > I know of no software for any audio editor that will do what Terry Smythe 
> > needs - except the manual process he hopes to avoid.
> >
> > Mike
> > --
> > mrichter@xxxxxxx
> > http://www.mrichter.com/