[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ARSCLIST] cassette crackle
Mr Biel,
I believe you have hit the nail on the head. I've looked back at all the
recordings with constant crackle, they are all mono recordings, the
clicking is always in the right channel. I have no information as to the
equipment used to make the recordings, but everything you suggest
matches so closely with what I'm experiencing, that I am confident that
you are right.
Thanks also to Richard for his helpful suggestions for using declicking
filters and to David Lennick for suggesting that I use only the Left
channel.
The single channel seems like the easiest option, certainly in this
instance it is the best option to take. (I've already made the transfers
and returned the tapes.)
In future, is there anything that I can do at playback, to reduce or
eliminate the problem - maybe a playback deck with a narrower head, or
some other solution?
Michael Biel wrote:
David Lennick wrote:
Dumb question (for various reasons, I can't listen to the file at the
moment). Were these cassettes all recorded on small mono portable
machines? Tapes made on these almost always have a crackly or noisy
right channel when played back on good decks and in stereo. The
solution here is simply to play only the left channel.
dl
Mike Hirst wrote:
I have no information as to what equipment was used. However, it is my
suspicion that small mono machines were used.
Maybe this proves that there is no such thing as a dumb question. When
we read that you were playing back the tapes on a stereo machine
everyone seems to have assumed that the recordings were stereo. Now
that we know they are not, what you are hearing is what is on the guard
band between the two mono tracks. Remember that the right channel is
the one closer to the center. The left is at the edge. There is a
possibility that the mono track record head is slightly narrower than
the width used by the split-track stereo head you are playing the tape
on. If the mono recorder the tape was made on was using either DC erase
or just a magnet to erase the tape -- two techniques often used on cheap
portables -- there WILL be crackle on parts of the tape that passed the
erase head but did not pass the record head. Often the erase head track
is slightly wider than the record head width, or else the record head
height was slightly off and it was recording slightly beyond the edge of
the tape and not close enough to the center.
Mike Biel mbiel@xxxxxxxxx
--
Mike Hirst
Managing Director
DAS-360°
16 Ocean View
Whitley Bay
Tyne & Wear
NE26 1AL
tel: 0191 289 3186
email: mike.hirst@xxxxxxxxxxxxxxxx
web: http://www.das360.net