[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ARSCLIST] Mag on film cleaning
Wow- that really is a tough road to hoe.
I would recommend you contact Mr. Edward Stratmann at the George Eastman
House in Rochester NY or Mr. James Cozart with the Library Of Congress
Sound and Motion Picture Division and see who they can refer you to.
Both gentlemen are, as far as I'm concerned, the "go to" authorities in
this area and will not steer you wrong.
There is a lab in NYC " Vidipax" but I don't know their level of film
expertise, especially in extreme cases.
Best Of Luck, and I'm glad at least you don't have VS to deal with. At
least for right now. Low temp and low humidity will help stave it off.
Cordially,
Bob
-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:ARSCLIST@xxxxxxx] On Behalf Of Jennifer Sidley
Sent: Friday, November 21, 2008 5:10 PM
To: ARSCLIST@xxxxxxxxxxxx
Subject: Re: [ARSCLIST] Mag on film cleaning
Bob -
It is mag stripe w/ images. It's camera original newsfilm, some of
which has literally been through a hurricane, so it will need some
cleaning. It is has tape residue and dirt in the image area, and the
occasional dirt embedded in what is left of the track. It is pliable,
not suffering from vinegar syndrome.
Is there not a standard procedure for labs for dealing with film w/ this
kind of damage?
Thanks for the info!
Jen Sidley
Film Archivist
Mississippi Department of Archives and History
Robert J Hodge wrote:
> Is this mag. stripe with an image on the film- or fullcoat with no
> image?
>
> I never saw anything that was so bad it needed cleaning. Especially if
> it's fullcoat 16 mm stock. "Renovex" or "Vitafilm" can be used with
> ventilation to condition nitrate or cellulose acetate based film.
>
> I don't think anything will help bond the oxide back to the base if
the
> binder has dried out. I'd try a little test with Vitafilm or Renovex
if
> I had some junk stock to do it with.
>
> A lab might be able to do more than I'm aware of. My techniques are
> somewhat antique, but I know they work with film with an optical
> soundtrack.
> If the film is just non pliant due to dryness, that might be why the
> oxide is falling off.
>
> BTW, Renovex and Vitafilm will dissolve tape spices, plastic reels,
and
> film cores. I put the film on a metal reel or core for processing.
Tails
> out.
>
> Bob Hodge
>
>
>
--
Jennifer Sidley
Film Archivist
Mississippi Department of Archives and History